DIFFLOCK.com
MAGAZINE | SHOP | FORUM | CLASSIFIEDS

Conversion Case studies

"Warning" You may find the following quite disturbing.

The following are just some examplse of the LPG conversions we see, Needless to say these were completely removed, The mistakes repaired and a proper conversion carried out, using the appropriate parts and upgrades,

Angle Iron has been welded onto the side of the spare wheel hole, soft wood has been badly screwed to it, and copious amounts of Mastic are sticking down the torn trim.

The Tank Frames have been welded to the boot floor, this is fine if you don't ever want to remove it, or update the tanks. Also you can see they are of the "single hole" type.

With no proper tank frame, this tailgate had yet more wood screwed underneath, and then was screwed down to the floor.

These cheap pieces of wood are badly attached to angle Iron welded onto the side of the spare wheel apartment

This Mixer looks as if it came from Star wars, and the single vaporizer is not suitable for the big 4.6 HSE Engine

The above Scare Studies were kindly provided by RPI Engineering

Â